Universal fitment footrest pinchbolts and nyloc nuts to do away with the standard pins that have a tendency to bend open and also the standard rusty bolts of some models.

Universal fitment footpeg rear hanger bolt kit. Consist of 4x m8 bolts & 4x m8 nyloc nuts . Picture shows a kit in gold

Universal fitment M8 triple clamp titanium tapered sockets caps x 6.

Front fender standard length titanium bolts . Racespec shown

Front fender bolts designed to incorporate the fender raising spacers . Racespec shown

Disc guard bolts.  2x M8 hex heads. (racespec shown)

Handlebar clamp mounts . 4x M8 tapered head socket caps.

Front disc (4 bolt application)    Racespec shown.

1x M6 flanged hex head bolt

Coil bolts 2x M6 flanged hex head bolts. Choose your colour

Front frame top mounting bolts. 4x M8 tapered socket caps

Rear master cylinder bolts. 2x M6 tapered head socket cap, state colour

Rear sprocket guard/shark fin bolts. Consists of 2x M6 flanged hex head bolts (racespec shown)

Rear brake mounting bolt . Tapered socket cap

Rear disc bolts (4 bolt type)  Racespec shown

Rear snail cam adjusting bolts . 2x tapered socket caps

Front exhaust shield bolts .2x tapered socket caps.

Rear airbox bolt  x1 shown over a blue insert

Ignition cover titanium kit. Consists of 8 M6 flanged hex head bolts

Titanium clutch cover kit . Consists of 6 M6 flanged hex head bolts

Final drive front sprocket bolt . 1x M8 flanged hex head bolt

Gear lever clamp bolt . 1x M6 flanged hex head bolt

Airbox nuts under rear fender.. 4x M6 flanged head locking nuts

Fuel tank & rear fender bolt kit , including the rear fender guard spacers x2 not supplied by others and hand machined by us.!

Water pump bolts . Consists of 4x M6 flanged hex head bolts

Exclusive to H&D Racing ,are these handmade very very special hollow titanium axles for the front and rear wheels to replace the alluminium ones and a swingarm axle to replace the heavy steel one, also hollow. These are factory rider replicas, not avaliable off the shelf anywhere else in the world!

The kit comprises of 3 hollow axles, 1 swingarm pivot nut, a special tool for the front axle,  rear wheel nut avaliable in blue or gold & high quality grease. These are availiable seperately at a per unit cost of £149.

All axles are currently to order, approx 3 weeks.

Here is a kit to do away with the cheap looking x head screw and the large steel bolt with integral washer. We have had the large bolt hand made and the quality is 100%. This kit is only avaliable in natural finish at the moment.

Titanium rear snail cam adjusters to fit 4RT & 315 designed to be super tough whilst giving accurate adjstment and exactly the same design as the Montesa cam.